Wichita UK

Main Office
+44 (0) 1234 350311

Southern Office
+44 (0) 20 8894 1161

clutch@wichita.co.uk

Wichita USA

Wichita USA
1-800-964-3262


Low Inertia Clutch Brake | Wichita Clutch UK

The Wichita Air-Tube Disc Clutch combines all the best features of the disc type clutch with all the advantages of the direct air engagement. The simplest and most trouble-free method of applying air pressure is through direct axial pressure application by compressed air in a special composition full-circle tube.

Wichita Clutches engage smoothly without noise, shock or impact and release completely in a fraction of a second. Extremely fast action is possible because of the small volume of air required.

Clutches may be slipped moderately to control the acceleration rate.

When large inertia loads are powered from electric motors, smooth, controlled slip starts by Wichita Clutches can keep power demands below the allowed maximum.

Heat generated by controlled slipping or high cycle rate operation is dissipated by the centrifugal blower design of these units.

Wichita Low Inertia and Very Low Inertia Clutches and Brakes are designed to be completely free from effects of centrifugal force and self energization.

Torque developed is in direct proportion to air pressure applied.

These clutches and brakes interface well with automated controls through simple air and/or electric circuits.

Water cooled, copper disc clutches are available for use when power transmission needs require excessive or constant slipping which demands higher heat dissipation.

Wichita Clutches operate perfectly when teamed with Wichita Brakes in production situations requiring tension control, cylic duty, or positioning.

Wichita Brakes have the same outstanding performance characteristics as Wichita Clutches.

Contact Info

Ampthill Road
Bedford MK42 9RD - England
Phone: +44 (0) 1234 350311
Email: clutch@wichita.co.uk
www.wichita.co.uk

Wichita UK Low Inertia Clutch Brake
dsgfdfsgfdsg